•High compressive strength, wear-resistance and floor dust-raised Improvement.

•Suitable for 2 - 5 mm thickness application without shrinkage, cracking and deterioration.

•F586 is mixed with small stones and can be used to repair potholes with a depth of 3 cm.

•F586 is economical material for repairing damaged floor surface.

•Packaging：F586A - high grade silica sand (25 kg / bag) + F586B - Strengthen resin (250g / bottle)

•Mixing Ratio：F586AB：Water (4–5kg)

•Consumption：7 m² / 3mm / set

•The construction surface requires a solid, clean, dry, no water, no dust and no oil etc.

•Apply W130 as a primer and ensure that the whole surface is fully permeated and cured.

•Pour F586A and water (4-5KG) into a clean mixing bucket and stir evenly, then add F586B and

stir until there is no lump.

•Pour the mixture of the construction area , a trowel to move to a desired uniform thickness

(thickness constructability 2-5 mm).

•Under normal conditions, F586 is ready after 24 hours for pedestrian traffic, after 72 hours for car traffic.

•Keep from the rain, exposure, extrusion and crashing during transportation, make sure the package

 is intact.

•It should be stored in a cool, ventilated warehouse.